How to Install a Sensor Light Switch

This post on how to install a sensor light switch has been sponsored and inspired by a product provided as part of the Lutron “Who Left the Lights On” Ambassador Program.  All opinions are mine and mine alone.

Did you ever walk into a room and ask yourself “Who left the lights on?”  I know that’s something I do several times a day. Of course, no one admits to leaving the light on. They are absolutely positive that they turned it off.  I guess it must be the cats who are forgetting to turn the lights off.   I decided that installing a sensor light switch would be one way to tackle this problem.   Since I’m the designated DIY gal in this family, it was up to me to learn how to install a sensor light switch.  I have done basic electrical DIY projects like installing our programmable thermostat so I knew I had the basic knowledge to tackle this project but I asked my Dad to come over to supervise since he has done this many times before.

How to Install a Sensor Light Switch

This explanation is based on changing a traditional single single pole switch to a Lutron Occupancy Sensor Switch for a single pole switch. You will need a screwdriver and a pair of pliers for the basic installation.

  • Turn off the power at the breaker box to the light switch you are working on. This involves going down into the basement with the spiders. Do this quickly and bring a flashlight.
  • Remove the face plate from your light switch.

How to install a sensor light switch

  • Make sure the power is actually off by using a voltage tester. This is important. Don’t skip this step. You want to make sure the power is really out.
  • Unscrew the switch assembly from the metal box it sits in and pull out the switch assembly carefully with the wires still attached. Look at the wires carefully.
  • There should be three wires.  There will be an incoming hot wire that is black (that’s where the electricity comes from) and a black return wire (that’s what takes the load to the fixture). There should also be a green wire. That is your grounding wire.  The Lutron Occupancy Sensor Switch will not work if there is not a grounding wire. If you have no grounding wire, call an electrician.

How to install a sensor light switch

As a note.  I live in an 1865 farmhouse.  Nothing in my home appears to have ever been done the correct way. When I removed the switch assembly, there were two black wires, one white wire, and one copper wire. After talking to my husband and my father, I learned that the white wires were common wires or neutral wires and I should ignore them.  The copper wire in my assembly was the same as a green wire would be in another switch assembly. At this point, we realized that the copper wire was not long enough to connect with the green wire on the new switch assembly so my father needed to add more copper wire to it to make it long enough to work with.

  • Very carefully, remove one wire from the old switch and attach the new wire from the Lutron switch using the wire nut or wire connector. Do this one wire at a time so you don’t get confused. Depending on the type of switch you had, you may need to unwrap the wire from around a screw and then straighten it before you attach the new wire using the wire nuts. My Dad did the first one to show me how and then I took over from there.

How to install a sensor light switch

 

How to install a sensor light switch

  • Put the light switch assembly back into the wall carefully and screw it in.

How to install a sensor light switch

  • Attach the light switch faceplate.
  • Turn power on and test.

The Lutron Occupancy Sensor Switch automatically turns lights on and off.  It uses XCT Sensing Technology that makes sure lights stay on when the room is occupied.  It also senses daylight and only turns lights on when they are needed.  It works with all types of light bulbs and can save up to $25 per year in electricity.

I installed the Lutron Occupancy Sensor Switch in the master bedroom.  Marty is disabled and often wakes up in the middle of the night.With the Lutron Occupancy Sensor Switch, the switch will detect his movement and turn the light on so he can see where he is going.

Save 25% off Maestro occupancy/vacancy sensor dimmers and switches on LutronStore.com PLUS one free Claro single-gang wallplate ($4.90 suggested list price) with each qualifying item.  Promo Code: wholeftthelightson Code expiration date: Sunday, Oct. 31, 2013 (subject to change).

Lutron-survey-infographic FNL (2)

I participated in a campaign on behalf of Mom Central Consulting for Lutron. I received product samples to facilitate my review as well as a promotional item as a thank-you for participating.

About Ellen Christian

Ellen is a busy mom of two teenagers who left the corporate world in 2008 to focus on a more eco-friendly life. She lives in rural Vermont where she juggles family, two blogs and a career in social media.

Comments

  1. I will send this to my husband. He is my handyman. I don’t know how to do any of this. He always kids that I can never get rid of him because of that.

  2. I leave the electrical work to my husband because I’ve been known to shock myself ;) Don’t ask. It’s too embarrassing!

  3. Look at you being all handy!! I don’t touch the electrical either, but am impressed you were able to take this on!

  4. That looks fairly easy to do. I think I could install this switch!

  5. That didn’t look to hard to install! I wonder, though, does it trigger when you roll over in the middle of the night? We like our bedrooms a CAVE. Dark as possible.

    • The sensitivity of the sensor can be adjusted based on the expected level of activity in the room. The default setting is high sensitivity and will perform best for most applications – this will detect very slight motions, such as turning a page in a book. This is recommended for spaces where occupants will often be seated for long periods of time and performing fine motions. Low sensitivity is the least sensitive setting and is best used in areas of major or large motions, recommended for spaces that generally only experience large motions such as foot traffic.

  6. Karen Glatt says:

    This is not that hard to do. I would love to have my nephew help put these in for me because someone is always leaving the lights on! I like the tutorial on this~

  7. This would be really useful to have! And while I think I’d like a bit of help, this doesn’t look too hard to DIY.

  8. This sounds like the solution to an ongoing battle with “someone” in our home whom leaves lights on. Great step by step!

  9. Apparently I have a person living in this house named “not me” who always leaves lights on :) This looks like an easy to follow tutorial!

  10. Thank you for the tutorial. I have been wanting to install these in almost every room in my house with the little ones around. The bathrooms are the worst in my house for lights being left on!

Speak Your Mind

*